SYSTEM SCHEMATICS
A2091
DECEMBER, 1989 PN-314674-01
ee
C= Commodore
SYSTEM SCHEMATICS
A2091
DECEMBER, 1989 PN-314674-01
INTERNATIONAL EDITION
COMMODORE “INTERNATIONAL EDITION”? SERVICE MANUALS CON-
TAIN PART NUMBER INFORMATION WHICH MAY VARY ACCORDING TO
COUNTRY. SOME PARTS MAY NOT BE AVAILABLE IN ALL COUNTRIES.
Commodore Business Machines, Inc.
1200 Wilson Drive, West Chester, Pennsylvania 19380 U.S.A.
Commodore makes no expressed or implied war-
ranties with regard to the information contained
herein. The information is made available solely on
an as Is basis, and the entire risk as to quality and
accuracy is with the user. Commodore shall not be
liable for any consequential or incidental damages
in connection with the use of the information con-
tained herein. The listing of any available replace-
ment part herein does not constitute in any case
a recommendation, warranty or guaranty as to
quality or suitability of such replacement part.
Reproduction or use without expressed permission,
of editorial or pictorial content, in any matter is
prohibited.
This manual contains copyrighted and proprietary information. No part
of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the prior written permis-
sion of Commodore Electronics Limited.
Copyright © 1989 by Commodore Electronics Limited.
All rights reserved.
A2091 SYSTEM SCHEMATICS
TABLE OF CONTENTS
¢ SPECIFICATIONS
¢ PARTS LISTS
¢e SCHEMATICS
NOTE
PLEASE REFERENCE A2091 USER MANUAL
PN-363227-02 FOR DETAILED OPERATIONS.
A2091 SYSTEM SCHEMATICS
A2091-40 SPECIFICATIONS
DESCRIPTION
This specification describes the Functional Requirements for an A2091-40 hard disk upgrade kit.
CONTENTS
The A2091-40 hard disk upgrade kit contains the following items:
A. A2091 Hard disk controller board E. Shock mounts for hard drive
B. Cables for card-mounting hard disk drive F. Stiffening rod for A2000
C. Quantum pro-drive 40S hard disk drive G. Foam pad for A2000
D. Cable for mounting hard drive in drive bay H. A2000HD sticker for front panel of A2000
An A2091-40 upgrades an A2000 to an A2000HD.
PARAMETERS
Dimensions: PCB 13.25 inches; Hard drive 6 inches by 4.25 inches by 2 inches
Weight: 5 Ibs.
Power requirements:
PCB: +12V 0.0A, +5V 1.0A
Hard drive: +12V 1.6A, +5V 0.7A Power up; +12V 0.8A, +5V 0.6A Normal operation
Hard drive features: 42 MB formatted capacity; 19 ms seek time; supports disconnect/reselect; 64K byte look-
ahead cache; 1:1 interleave
A2091 SPECIFICATIONS
DESCRIPTION
This specification describes the Functional Requirements for an A2091 hard disk controller assembly.
PARAMETERS
Dimensions: PCB 13.25 inches by 5 inches
Weight: 1 lb.
Power Requirements:
Without a hard drive mounted to card:
+12V0.0A
+5V 10A
With hard drive mounted to card:
+12V 2.5 A max startup, 0.9 A max continuous
+S5V 2.5 A continuous
Features: Hard disk controller for SCSI or XT style drives; Sockets for up to 2 MByte fast RAM:
Auto-boot ROMs; Boots directly into Fast File System; Rear socket permits connection
of Macintosh style SCSI expansion devices; Space on card to mount user’s own 3.5” hard
drive
A2091 SYSTEM SCHEMATICS
JUMPERS
JP1 is used to set the amount of memory on the board. It has 4 positions that represent no memory, 512K, 1M and
2M of memory.
JP2 is used to enable and disable the auto-boot ROMs. The ROMs must be disabled when the board is installed in
an A2000 with KS1.2 ROMs. The position marked ‘‘AUTO”’ enables the auto-boot ROMs and the position marked
“‘DIS’’ disables the autoboot ROMs.
JP3 determines the interrupt level that the board generates and is not user adjustable. It is factory wired to INT2.
JP5 is a software readable set of 3 jumpers. The function depends on the driver software, but with V4.4 of the driver
the function is as follows:
Jumper 1: Enable Multiple LUNs
Jumper 2: Enable long boot timeout, disable parity check
Jumper 4: Undefined
JP201 determines the clock rate fed into the WD33C93 SCSI controller IC. It is factory wired for a 7 MHz clock
rate and is not user adjustable. If an end user would like to replace the standard WD33C93 with a high speed version
of the part, the trace between the upper 2 pins of JP201 can be cut, and the lower 2 pins wired together. This would
result in a 14 MHz clock rate which would effectively double SCSI throughput given a hard drive that can operate
at that speed.
Factory settings are as follows:
JP1 OK (no memory)
JP2 DIS (Autoboot disabled)
JP3 INT2
JP5 ALL 3 functions disabled
JP201 7 MHz
CONNECTORS
CN1 (Not labeled on board) 100 pin Amiga edge card connector
Designed to plug into a standard A2000 100 pin Amiga slot.
CN2 XT LED
This is designed to accept the plug from the hard disk LED on the front panel of the A2000 if the user is using an
XT drive. This connector will light the front panel LED whenever the XT drive is accessed.
CN3 SCSI LED
This is designed to accept the plug from the hard disk LED on the front panel of the A2000 if the user is using a
SCSI drive. This connector will light the front panel LED whenever any SCSI device is accessed.
CN4 XT drive connector
This 40 pin connector is designed to attach to a ribbon cable that connects to an XT hard drive.
CNS External SCSI connector
This DB25 connector is designed to connect the A2091 to external SCSI devices. It uses a pinout identical to the Apple
Macintosh (R) SCSI connector and has the capability of connecting to any peripheral that is designed to connect to
the Macintosh (R). Up to 7 external devices may be connected by daisy-chaining.
CN6 Internal SCSI connector
This 50 pin header is designed to attach to 1 or more (up to 7) internal SCSI devices. Multiple devices are connected
by crimping multiple connectors onto 1 ribbon cable.
CN7 Power connector
This 4 pin molex connector supplies power to a 3.5” hard drive that the user may install on the A2091. The maximum
power that may be drawn from this connector is as follows:
+ 12V: 2.5A max startup (8 sec), 0.9A max continuous; +5V: 1.5A max continuous
MOUNTING OF HARD DRIVE
Space is provided on the A2091 for the end user to mount a 3.5 inch hard drive. Mounting hardware is not included,
and a cable is required to allow the hard drive to draw its power from the A2091, CPN 312646-01.
313441-01
313441-02
313441-03
313441-04
313441-05
313441-06
363243-01
363242-02
318900-01
318882-01
318884-01
314877-02
363033-01
363034-01
363227-02
252253-12
317806-01
317807-01
318896-01
312341-02
318556-02
312773-01
312778-01
906610-01
905970-04
316754-01
312646-01
312573-01
313439-01
313440-01
312713-01
312748-01
311554-01
312749-01
907272-02
905960-04
312769-01
312770-01
312771-01
312772-01
C
C
&
©)
erosion? Lome meno eemens
A2091 SYSTEM SCHEMATICS
A2091 MAJOR PARTS LIST
A2091-40 SHIPPING ASSEMBLY-U.SS.
A2091-40 SHIPPING ASSEMBLY-GERMANY
A2091-40 SHIPPING ASSEMBLY-EFIGS.
A2091-40 SHIPPING ASSEMBLY-SCANDI.
A2091-40 SHIPPING ASSEMBLY-CANADA
A2091-40 SHIPPING ASSEMBLY-AUSTRALIA
BULK PACKING BOX
PACKING BOX
WARRANTY CARD USS.
WARRANTY CARD CANADA
WARRANTY CARD AUSTRALIA
SERVICE CENTER LIST U.S.
A2091 USER MANUAL - EFIGS
A2091 USER MANUAL - SCANDI
A2091 USER MANUAL - ENGLISH
PLASTIC BAG
DISKETTE - INSTALL (US)
DISKETTE - INSTALL (GER)
SOFTWARE LICENSE U.S. & CANADA
DISKETTE REPLACEMENT CARD (US)
DISKETTE REPLACEMENT CARD (CANADA)
A2091 MAIN ASSEMBLY
BRACKET, MOUNTING (ON MAIN ASSY)
SCREW PHILIPS 6-32 (QTY =4, MAIN ASSY)
NUT, KEPS 6-32 (QTY =8, 4 ON MAIN ASSY, 4 FOR HD MOUNT)
UPC LABEL
CABLE, POWER
CABLE, DATA 50P SHORT
CABLE, DATA 50P LONG
DRIVE, HARD 40MB SCSI QUANTUM
TIE BAR
ISOLATOR, VIBRATION
NAMEPLATE (AMIGA 2000HD STICKER)
FOAM SUPPORT
WASHER, FLAT
NUT, HEX M3
A2091 PCB ASSEMBLY - REV 4
SCHEMATIC - PCB REV 4
FABRICATION - PCB REV 4
ARTWORK - PCB REV 4
A2091 SYSTEM SCHEMATICS
COMPONENT PARTS LIST
PCB ASSEMBLY #314386-03
Commodore part numbers are provided for reference only and do not indicate the availability of parts from Commodore.
Industry standard parts (Resistors, Capacitors, Connectors) should be secured locally. Approved cross-references for TTL chips,
Transistors, etc. are available in manual form through the Service Department, order #314000-01.
IC COMPONENTS RESISTORS
390333-03 | 16L8A RAM CONTROLLER US PROGRAMMED 901550-105] 33 OHM 1/4W
R1,3,9-11
INTO P/N 390071-02 901550-01 | 1 K OHM 1/4W R2,4,6,8,101
390332-01 | 74F158A 901550-49 | 100 OHM 1/4W
901521-46 | 74LS245 901550-131] 56 OHM 1/4W
390563-02 | DMAC 380388-04 | 220/330 OHM/IOPIN/8 ELEMENTS/SIP
390206-01 | WD33C93 380388-01 | 220/330 OHM/6PIN/4 ELEMENTS/SIP
901522-30 390227-04 |33 OHM/IOPIN/) ELEMENT/SIP
390617-01 902410-08 | 4.7 K/10PIN/) ELEMENT/SIP
901521-03 902410-06 | 3.3 K/IOPIN/9 ELEMENT/SIP
i vests CAPACITORS
Henne EnOGRAMMED: ORD DRIVER U12 PROCES te 190002000 |. 35E. RADIAL LEAD,-250 C3-5,7-16,19,20,23,24,
INTO P/N 380204-01 Se
39050802 | EPROM PROGRAMMED, EVEN U13 PROGRAMMED —
Brice NTO DyNB 3000401 | (25189424 | ELECT RADIAL LEAD 22uF 16V C32,33
CONNECTORS
50 PIN, DIL
40 PIN, DIL
3 PIN, SIL
25 PIN *“*D*’ SUB, RIGHT ANGLE
HEADER 2 BY 4
HEADER 2 BY 3
JUMPER
SOCKET 20 PIN IC
SOCKET 28 PIN IC
SOCKET 40 PIN IC
SOCKET 84 PIN IC
FILTERS EMI 100pF
DIODE 1N914
CONN POWER 4 PIN
LABEL, FCC ID A2091
U5,U14-29
390241-05
903345-04
903345-03
39033301
316755-01
A2091 SYSTEM SCHEMATICS
CO-O8EPIEH AIquiassy qd ;
‘Nid | NO AINO LNG Sdf NO SYAdWAS AAUHL LAS (€
‘NOILISOd .OLNV;, NI Z7df NO YAd NAL ANO LAS (Z
‘NOILISOd «4O., NI Idf NO YAdWNAL ANO LAS (1
(Q4IAIDAdS ASIMYAHLO SSYINA) ‘SALON
QYy9 CYYH b60cu
AYOQOWNWOD
» A3Y 2cc2te AU J C ALON 34S
1S9S TUNY3ZINI
3ZAI¥O SNE
1602
USN LS3HIA
téc2te evs
o922te 4SSU
NM /NNNOS
¥ ABM Z2ZZ2t€ AAU
Reed
OtIna
v
eto
bo
i
4 etn
«
+ eal
eco fea a C7if}2 a f
€ HLON 4S
[ HLON SAAS
Schematic #312770 A2091 SYSTEM SCHEMATICS
Sheet 1 of 3
O
=
an
iNve; JOINTS
Arc 19
acta +2 -SDREO
(os a SDACK
ref 8 -S -C8S
vec ial} ——_—1 > “6A
[fa vs eee a —C5X0 vcCc
5 as STS xoacx 2 XORED
LOcS! 6. Hl 2 | S, sae _XDACK
wLAVE Sa tS FANCTOIN eee = = f= —_ROMSEL =
aCON= TeouTr >. pees 12 ea IGIN peeae bai thas
6 tes
CPAC = : eat aX | Ece_csx:|_ 1 _CSX1 ~ EPROM
Ova we a 12 a Cut ISIN InTX 8 1 OATA (GC)
= an ¢ Tees? 2G2uT a rahi H< OATS (1)
R (5) eer = ee A $5 (5) 7H#LS32 cutPyr = at a
A(6) <J = A (4) 1735 $22 > Sdi1) outPuTsitg——]_ > DATA (W)
- = A (3) er ie SD (2) - ouTPUTY > Rta (53
A (2) = ger R67) riety 36% $2 (2) oursrsig—T > para (6)
A (1) 7 Q (8) - 305 $2 (4) ourPurairg——T_ > ATA (7)
33 Oth) sys [71 +< $38) ouTeDt >
7 Ati1) = $97 | 28 —_____S $5 3) 2 u2 z (22
a A (12) ie — 74uLS2us an
Reta = 7 4 ) 7 _2 5) pits S7hld or Ke
AEE ane th a1 1s . a5 By 7 ; ALY or FoM
16 a= e a3 02 «faa : 1
otis ae BeAr iss c3 S | i ant Bs . 2 a5
(17) . ae) Cs i | - 1 65S §5—s : .
31 A(18) J_'a3 cs g2 | ! ry 1 7145 Ba D r
53 3285 C3 i ela7 = 12 s
33 (13) eis o) [Gs ) nae eg Baul =
p1a2) So 2 B51) 2 a ae: i | Ss : his
AR (23) s _ BR ack As 551 re ae 22 1| Pie He Le
O15) ST Tes 85 es ae 57] _BUFEN ee
feet | = DTACK 219 mis [3 | <_] pia DISTELE AUTO300T yee
Bui) Sop —— ie s ei er tT |
Oi 1) = ~UuDS exe cis | 23 I | iz | | 25; Ail_ts
: = —A5 722 VCC |e sas a Bo +) a
012} : = 3112) 22: bad 11 th Ae ee 4 ‘43 5 5 8
8) (1) — 0 (9) Ree vcCc? 2 {oo Bu 16 25 | Voc
5 (2) te 6 (2) 223 vie2 LSI : tl Ll 6 a5 Bais i oie 13.5 Voo|!
Did) x Dt} visi |_€3 ee} 1) LC ore 7155 Ba rH am te oh i sani
0 (a) 35 S vis21_§ 3347 a FE Hea a aL 6'57 = B72 13 = | 8'-5 gyteutol [> Dal
Pre Bt) ed pec oa 2980") ba im yt tks | outrutty}—_+-—1_> 9218 (9)
wo visa | 2 | | =O THLS24S . a EA ] Data (it)
z* j j q “ ~ T 3 mi :
aac Bob at | 1] Vos U3 an a ourruMes —+< OR TA C2:
e's 4 cA a : : epaltid a ae ATS (13)
a "eset ui me aa as ert tS cera
ie DATA (9: 15) Lk iv 3 si Eres
313 OE
163 PIN CONNECTOR VCC cal 3 eae -ceE
fe aa D(9:15) 23k or nc che
| U.7KxQ SIP. ) REY or PGS
= HARD DISK PONEA ' : IK
' Vv Gnd 2
| ae
U13
Au:23) (O EFRON =
vcc
D> ht ¢
os as7 fu~
ere aida! COMPO ENT COMPONENT
us Us a
N.
10
Schematic #312770 A2091 SYSTEM SCHEMATICS
Sheet 2 of 3
VCC Ce SColL LED
33C93 SPEED
1G Kez 7 MYz : RN3
229/330
CNY AL 50 PIN CONNECTOA
4YQ-PIN DIL : (INTERNAL SCSI CONNECTOR)
|
—RESETL> |
DB2S aes
EXTERNAL SCSI CONNECTOR
. ___} B 1 : 19:1
. | _ _toal> 23) Re arn 132
| ror Reset >% 38 jazSET AcK 133
3 . ? Cia BST
, y ; :
1
B24 23e <—]_ion De $07 {34
ot secs .
928 256 <TJ_108 $35 22
t bh ©6100 :
~ —
on
| ad -
yu uM
* CNS
; :
028 276 <1 xpac N D4 <1 Larne | 5 VCC
aie aid ———_ > OREO ——— > Lane SERS , ae
932 "ep ° INTX sop 25 INSI4
O34 33 BUFRD_R2 oul me
36 aie SO (0:7) eee ves /2
38 ©«37 <_]_¢Sx9 skies vS54 }28
a) 399Q—
S0 (0:7) U4
7 R7 36 : 3,21” VOT S t
VCC iY | ni h ua
PS ie a ea SCSI_UAIA lO: 7)
222/230 226/329
X2 RN '
cueps = = 7407
xT LED | = <_< be J_R=SET
U7
FLOOSYOUST JUHMP=EA
VCC
Vcc 7T4ULS32
33 1
74LS08 ic
BUFRD_A2 : ai UlT
100
Rl2 ie
-SCSI_LED
7YLSO8 |
BUFRD_A1 .
AC)
u
s
U10
2
U10
Schematic #312770 A2091 SYSTEM SCHEMATICS
Sheet 3 of 3
DATA (0:15)
A17_MUX_818 C>—
Fig
TUF ISe fife aes,
V1 ;
sRAMSEL
US FR (1:16)
A\_|
COOWO
ia MUXED_AD08 (0:8) <c
MUXED AODR (9:8)
—<— DRTA (0:15)
ato | LOK
TELS32
1)
_LC5
|
ese $< 1_C952 IPPE
ats if “5 OOF 25 _ —1 ues
jNE SUS KC peo NC BUS
jEBKER_A "SOUP PZA_WA
ae Vv I "en OE Pe CNAs
VUXED_AGOR (€: 8)
7ELS38
sa’. zo
= ~ Les
u10
|)
588°
HS mn US
£ re iN 5 Vv
-LOWER_WR
ary: s bR x 8
D x U
MUXED_ADDA (@: 8)
NOTE: NO CONNECT ON ORAM’S ARE CONNECTED TOGETHER TO FACILITATE FUTURE CONVERSION TO YM PART (1M X 4) ‘
C= Commodore
Computer Systems Division
1200 Wilson Drive
West Chester, PA 19380